INSULATION TESTER 1.2/50 WITH TWO SOURCE IMPEDANCES: 48 OHM AND 500 OHM. UP
The MIG14403 is an insulation tester with a voltage wave shape 1,2/50 ìs. The specified voltage waveform is generated across an open circuit (oc), or within the specified load range. For failure detection (breakdown, flashover) the peak output voltage and current of the MIG are indicated on the front display and the two BNC monitor outputs (v,i) allow monitoring the voltage and current wave shapes on an oscilloscope. MIG14403 uses solid state switching components maintaining a consitent waveshape over the full range up to 144 kV. The generator is a modular constructioncomprsing 24kV modules which can be stacked on the generator to achieve the required voltage.